BMWVK - 130A 130AA

Product Identification

Product ID:130A 130AA
MSDS Date:05/01/1987
FSC:9150
NIIN:00-857-9079
MSDS Number: BMWVK

Responsible Party
FISKE BROTHERS REFINING CO
129 LOCKWOOD ST
NEWARK, NJ 07105-4720
US

Cage: 9N579

Contractor
FISKE BROTHERS REFINING CO
TOLEDO, OH 43605 US

Telephone: 419-691-2491

Cage: 9N579

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN; PROLONGED CONTACT MAY CAUSE
REDDENING, IRRITATION. EYES; IRRITATION. INGESTION; MINUTE AMOUNTS
ASPIRATED INTO THE LUNG MAY CAUSE MILD TO SEVERE PULMONARY INJURY.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid

First Aid:EYES; FLUSH WITH WATER FOR 15MINUTES. IF IRRITATION PERSIST
CONT A DOCTOR. SKIN;REMOVE ANY CONTAMINATED CLOTH AND WASH WITH
SOAP AND WATER. IF INJECTED BY HIGH PRESSURE UNDER THE SKIN CONTACT
A PHYSCI AN IMMEDIATELY REGARDLESS.INHALATION;IFOVERCOME FROM VAPOR
OF A HOT PRODUCT REMOVE TO FRESH AIR IMMEDIATELY.'

Fire Fighting

Flash Point Method:COC
Flash Point:400F,204C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER SPRAY
(FOG)
Fire Fighting Procedures:WEAR SCBA FOR CONFINED SPACES, COOL EXPOSED
CONTAINERS WITH WATER
Unusual Fire/Explosion Hazard:NA

Accidental Release

Spill Release Procedures:SCRAPE UP GREASE WASH REMAINEDER WITH
APPROPIATE SOLVENT OR ADD ABSORBENT.KEEP PRODUCT OUT OF WATERWAYS
AND SEWERS.
Neutralizing Agent:NA

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE, DO NOT HANDLE OR STORE NEAR HEAT,SPARKS OR FLAMES. OR STRONG
OXIDANTS.
Other Precautions:REMOVE OIL SOAK CLOTHING AND LAUNDER BEFORE REUSE.

Exposure Controls

Respiratory Protection:NORMALLY NOT REQUIRED
Ventilation:USE TO CAPTURE FUMES AND VAPORS
Protective Gloves:OIL RESISTANT IF NEEDED
Eye Protection:GOGGLES IF NEEDED
Other Protective Equipment:OIL RESISTANT APRON IF NEEDED
Work Hygienic Practices:CLEANSE SKIN THROUGHLY AFTEER USE
Supplemental Safety and Health
NA

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>550F,>288C
Vapor Pres:< 0.01
Vapor Density:>5
Spec Gravity:0.97-0.983
Evaporation Rate & Reference:< 0.01
Solubility in Water:NELIGIBLE
Appearance and Odor:SMOOTH TAN GREASE WITH MINERAL OIL ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:SO2, CARBON MONOXIDE

Disposal

Waste Disposal Methods:AT A APPROVED FACILITY IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.